Epever PWM 60A Solar Charge Controller

Epever PWM 60A Solar Charge Controller
  • Built-in LCD display
  • Battery temperature compensation
  • Warranty: 1 year
USB Output 5 V / 2.4 A max
Battery Type Sealed, Gel, Flooded, User
Charging Modes Bulk, Boost/Equalize, Float
Load Modes Light Control, Light Time control, Dual Time Control
Protection Against
  • PV short circuit
  • PV reverse polarity
  • battery overvoltage
  • battery over-discharge
  • battery reverse polarity
  • battery overheating
  • load overload
  • load short circuit

The multiple load modes of Epever charge controller allows it to be used on a solar home system, solar street light, traffic signal, solar garden light and so on. We recommend you to also buy the USB configuration cable for an easier configuration (sold separately). You can download a compatible software and make all the configurations from your laptop. The controller works with 3 battery types out-of-the-box: Sealed, Gel, Flooded. If you want to use it with other battery types, say, lithium you need to set the battery type to "User" then adjust other parameters respectively. This unit is a Positive Ground (PG) controller meaning that you cannot ground the + side of the circuit in 2 separate locations. Please make sure this is suitable for your use case. The package includes 1 solar charge controller and a manual.

Pros Cons
High-quality PCB Clunky configuration software

Charge Controller Specifications

Model NameEpever VS6024AU
Controller TypePWM
Grounding TypePositive
Nominal Voltage12 V, 24 V auto
Rated Charge Current60 A
Rated Load CurrentN/A
Max Terminal Size3AWG (25mm2)
Max PV Input Voltage50 V
Max PV Input PowerN/A
Dimensions8.4 x 5.1 x 2.84 in (213.4 x 129.5 x 72.1 mm)
Weight2.25 lbs (1.02 kg)