Renogy RNG-100D Solar Module

Main Components:

• 1 x RNG-100D Solar Panel
• 1 x Renogy Adventurer Li 30 A PWM Charge Controller
• 1 x Renogy BT-1 Monitoring Device
• 1 x 30ft 10 AWG MC4 adapter kit, 1 x 16ft 10 AWG adapter tray cable, 1 x Renogy cable entry housing.

This kit is specifically designed for RV applications as it allows an aesthetically pleasing flush mounting for the charge controller and is negative-grounded for battery compatibility. The 30 A Adventurer charge controller has an embedded LCD screen for operational data display and allows full configuration of parameters. It has comprehensive self-diagnostic systems and electronic protection against system faults and user errors. Adventurer controller pairs with the included BT-1 Bluetooth module to remotely communicate the system details. All the data will be available through the Renogy BT smartphone app. If you decide to add more power after a while of usage you can add 3 more panels as the controller supports up to 400 W power. The 100 W mono panel has pre-drilled holes for faster mounting, an integrated bypass diode for shade effect minimization, 15.47% efficiency.

Main Components:

• 2 x RNG-100D Solar Panels
• 1 x Renogy Wanderer 30 A PWM Charge Controller
• 1 x 20 ft 10 AWG MC4 adaptor kit, 1 x 8 ft 10 AWG tray cable, 2 x set of Z-brackets, MC4 connectors

This is a starter kit by Renogy with two 100 W monocrystalline solar panels and negative-grounding 30 A Adventurer PWM charge controller. It especially suits to vehicles with battery negative on the chassis. The charge controller allows for the system expansion up to 400 W so you can add more panels later. On an ideal sunny day, you can expect to get 1kWh energy. Depending on the Sun's availability you can charge a 50 Ah battery from 50% to full in 1.5 hours.

Main Components:

• 2 x RNG-100D Solar Panels
• 1 x Renogy Rover 20 A MPPT Charge Controller
• 1 x 20 ft 10 AWG MC4 adaptor kit, 1 x 8 ft 10 AWG tray cable, 2 x set of Z-brackets, MC4 connectors

This is a starter kit by Renogy with two 100 W monocrystalline solar panels and 20 A Rover MPPT charge controller. MPPT controllers transfer power 30% more efficiently so the charging time is faster. The charge controller allows for the system expansion up to 400 W in 24 V battery systems so you can add more panels later. 200 W is just right for 12 V systems with 20 A MPPT charge controller. Renogy Rover features a die-cast aluminum shell for efficient heat dissipation.

Main Components:

• 2 x RNG-100D Solar Panels
• 1 x Renogy Rover 40 A MPPT Charge Controller
• 1 x 20 ft 10 AWG MC4 adaptor kit, 1 x 8 ft 10 AWG tray cable, 2 x set of Z-brackets, MC4 connectors

This is a starter kit by Renogy with two 100 W monocrystalline solar panels and 40 A Rover MPPT charge controller. MPPT controllers transfer power 30% more efficiently so the charging time is faster. The 40 A charge controller allows for the system expansion up to 800 W in 24 V battery systems and 400 W in 12 V systems so you can add more panels later.  Renogy Rover features a die-cast aluminum shell for efficient heat dissipation.